|
® | O U R P R O D U C T S |
| Deep vacuum systems | |
|
Deep vacuum systems UVM-10M, UVM-6 UVM-10M, UVM-6 systems are used for thermal vacuum degasification, azotizing, drying, heating and purification of transformer, cable, turbine and other oils for removal of gases, free and soluble water and particulate matter. The system is applied while installation, repair and operating of oil-filled high-voltage equipment up to 1150 kV (power transformers, high-voltage switches etc.) as well as turbines. The system can be exploited for heating of oil-filled units with hot oil and for vacuumizing of power transformers. The system consists of two isolated sections: the oil section and vacuum section interconnected with a vacuum conductor . . . . . more |
|
Regeneration system |
|
|
Regeneration system UVM-R-0.7 model The system is intended for full regeneration of transformer oil with adsorbent of electrical insulating oil viscosity of which does not exceed 70 cSt at temperature 50°C. That is the system restores oil to its virgin properties. The system is used while installation, repair and operation of oil-filled high-voltage equipment up to 1150 kV (power transformers, high-voltage switches etc.) . . . . . more |
|
Purification systems |
|
|
Purification systems UVM-10-0.16, UVM-10-0.6, UVM-10-1.0, UVM-10-1.7, UVM-10-2.2, UVM-10-4.0 and UVM-EP-10-0.6, UVM-EP-10-4.0 The systems are used for thermal vacuum dehydration and degasification of electrical insulating and lubricating oils in order to withdraw free and soluble water, gas as well as for removal of particulates. They are applied while installation, repair and operation of oil-filled high-voltage equipment. . . . . . more |
|
Zeolite treatment systems |
|
|
Zeolite treatment system UVM-Z-4.3, UVM-Z-1.7, UVM-Z-3.5, Zeolite Recovery Block-100, Zeolite Cartridges-260 models. The system is used for treatment of electric insulating oils (viscosity is not to exceed 70cSt) by means of zeolite (sorbent) in order to eliminate mechanical impurities, soluble and free water, to decrease acidity of oils. The zeolite agent is restored subsequently directly in the system. The system is applied while installation, repair and operation of oil-filled high-voltage equipment . . . . . more |
|
Heating & filtration systems |
|
|
Heating filtration system UVM -F-10-0.6, UVM-F-10-4.0, UVM-F-0.5(micro) The systems are used for thermal vacuum degasification and dehydration of insulating and lubricating oil in order to clarify from particulates, soot, free and soluble water, alkali, water-soluble acids. The viscosity of oil is not to exceed 70 cSt at temperature +50°C. The pecularities of UVM-F-0.5(micro) model are that it is compact, mobile filtrating machine that can be transported with one person. For a better effect oil to be filtered must be pumped through the filter 4 or 5 times . . . . . more |
|
Heating stream systems |
|
|
The heating stream system category UVM-HS-70, UVM-HS-18 model The system is used for heating of transformer oil while topping-up, change or drying of transformers. The system is suitable for heating mineral, industrial, turbine and other oils as well as liquids not causing corrosion of materials the heater is made of. The system can be applied at the establishment engaged in repair and maintenance of transformer plants, at power stations. The system is intended for exploitation both indoors and outdoors. . . . . . more |
|
Filling-up high-voltage bushing plant |
|
|
The filling-up high-voltage bushing plant UVM-HVF-4 The plant is used for topping up high-voltage oil-filled hermetic bushings with degasified transformer oil while installation, repair and operation of power transformers, switches and other oil-filled high-voltage equipment. The device can be exploited outdoor at temperature from -25 to +40°C . . . . . more |
| back to: | deep vacuum systems | regeneration system | purification systems | zeolite treatment systems | heating filtration systems | heating stream systems | filling-up high-voltage bushing plants |
| home | contacts |
|
Waiting for your calls: 380 57 714 48 14 380 57 714 48 14 |
|
| or your messages: sales@uvm.com.ua , export@uvm.com.ua |